DelSORB Blue Silica Gel SDS
Section 1: CHEMICAL PRODUCT & COMPANY IDENTIFICATION
Product Name: DelSORB®
Chemical Name: Blue Indicating Silica Gel
Synonyms: Amorphous Silica Desiccant
Supplier: Interra Global Corporation 800 Busse Highway Park Ridge, IL 60068 USA
USA Outside ‘USA’
Section 2: HAZARDS IDENTIFICATION
Potential Health Effects Inhalation: May cause dryness and irritation to mucous membranes,nose, and throat. Symptoms may include coughing, sore throat, and wheezing.
Ingestion: No adverse effects expected.
Skin Contact: May cause irritation with dryness and abrasion.
Eye(Contact: May cause irritation, redness and pain.
Chronic Exposure: Repeated exposure may cause symptoms similar to those listed for acute effects. Synthetic amorphous silica does not produc silicosis. Prolonged exposure to cobalt has been shown to cause cancer in laboratory animals.
Section 3: COMPOSITION & INFORMATION ON INGREDIENTS
Molecular Formula: SiO2 · nH2O + CoCl2
|CASNumber||Ingredients||Weight in Percent (%)||Hazardous|
Section 4: FIRST AID MEASURES
Eye Contact: Check for and remove any contact lenses. Incase of contact, immediately flush eyes wth plenty of water for at’least’ 15’minutes. Get medical attention if’ irritation occurs.
Skin Contact: Wash with soap and water. Cover the irritated skin with an emollient. Get medical attention if irritation develops.
Ingestion: Give several glasses of water to drink to dilute. If large amounts were swallowed, get medical advice.
Inhalation: If inhaled, remove to fresh air. If breathing is difficult, get medical attention.
Section 5: FIRE & EXPLOSION DATA
Fire: Not considered to be a fire hazard.
Explosion: Not considered to be an explosion hazard.
Fire Fighting Media and Instructions: Use any means suitable for extinguishing surronding fire.
Special Remarks: Use protective clothing and breathing equipment appropriate for surronding fire.
Section 6: ACCIDENTAL RELEASE MEASURES
Small Spill: Use appropriate tools to put the spilled solid in a convenient waste disposal container. Use respiratory protection and eye protection.
Large Spill: Use a shovel to put the material into a convenient waste disposal container. Vacuuming or wet sweeping may be used to avoid dust dispersal. Use respiratory protection and eye protection.
Section 7: HANDLING & STORAGE
Storage: Keep container tightly closed. Suitable for any general chemical storage area. Containers of this material may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product.
Section 8: EXPOSURE CONTROLS / PERSONAL PROTECTION
Airborne Exposure Limits:
Silica (synthetic, amorphous): OSHA Permissible Limit (PEL) ‐ 80 / (%Sio2) mg/m (TWA)
ACGIH Threshold Limit Value (TLV) ‐ 10 mg/m3 (TWA)
Inorganic Cobalt Compounds: ACGIH Threshold Limit Value (TLV) ‐ 0.02 mg/m3 (TWA) as Co, A3:
Engineering Controls: Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to airborne contaminants below the exposure limit.
Personal Protection: Safety glasses. Lab coat. Respirator (NIOSH Approved). Gloves.
Section 9: PHYSICAL & CHEMICAL PROPERTIES
Physical State: Solid, crystals
Solubility: Insoluble,Chloride may leach out.
Specific Gravity: 2.1 (Water = 1)
pH: 5.5-9.0 (in 5% slurry)
Boiling Point: Not applicable
Melting Point: Not applicable
Vapor Pressure: Not applicable
Vapor Density: Not applicable
Evaporation Rate: Not available
% Volatiles by volume @ 21C (70F): 0
Section 10: STABILITY & REACTIVITY
Stability: The product is stable.
Hazardous Decomposition Products: Oxides of carbon and silicon may be formed when heated.
Hazardous Polymerization: Will not occur.
Incompatibility with powerful oxiders: Reacts with hydrogen fluoride, fluorine, oxygen di-fluoride, chlorine tri-fluoride, strong acids, strong bases, and oxidizers.
Conditions to Avoid: Moisture, extreme heat, and incompatibles.
Section 11: TOXICOLOGICAL INFORMATION
Toxicity to Animals:
LD50: Not available.
LC50: Not available.
Carcinogenicity: Cobalt and its compounds have been shown to cause cancer in laboratory animals.
Section 12: ECOLOGICAL INFORMATION
Ecotoxicity: This material is not expected to be toxic to aquatic life.
Section 13: DISPOSAL CONSIDERATIONS
Waste Disposal: Waste must be disposed of in accordance with federal, state and local environmental control regulations.
Section 14: TRANSPORT INFORMATION
DOT Classification: Not a DOT controlled material (United States).
Identification: Not applicable.
Section 15: OTHER REGULATORY INFORMATION
Health Hazard: 1
Fire Hazard: 0
Personal Protection: E
National Fire Protection Association (U.S.A.):
|CASNumber||Ingredients||SARA 302||SARA 313|
Section 16: OTHER INFORMATION
References: Not available.
Other Special Considerations: Not available.
The purpose of this Safety Data Sheet is to describe the products in terms of their safety requirements. The information above is believed to be accurate and represents the bet information currently available to us. However, we make no warrant of merchantability or any other warranty, express or implied, with respect of such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall Delta Adsorbents be liable for an claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Delta Adsorbents has been advised of the possibility of such damages.